Set up touchless check-in options

Set up touchless check-in: geofencing, email check-in and returning visitors

Touchless check-in lets visitors check in on their own phone instead of at a kiosk. This article explains the options that control it: the main on/off switch, geofencing, email check-in, returning visitors, invite-only check-in, and how a visitor type can change them.

For a quick tour of the whole Check-in page, see Configure check-in settings. To print a QR code that visitors can scan, see Set up a static QR code.

Before you start

  • You need to be a Company Admin or a Location Admin.
  • Open Visitors > Settings > Check-in for the location you want to change. The options below are on this page.

Availability: if this option is greyed out or missing, contact your Vizmo account manager.

Check-in settings page, Touchless Check-in Settings card with geofencing and email options

Turn touchless check-in on or off

  1. Go to Visitors > Settings > Check-in.
  2. In Touchless Check-in Settings, use Enable Or Disable Touchless Check-in And Check-out.
  3. Select Save.

When this is off, visitors cannot check in with their phones. Their details must be entered on the Vizmo Kiosk or by a guard using the Guard Kiosk. Turning it off also switches off the Static QR Code, and the geofencing and QR code options disappear from the page. If you turn touchless check-in back on, turn Static QR Code on again yourself.

Add geofencing

Geofencing asks visitors to share their phone's location and lets them check in only if they are within a set distance of your location.

Step 1: make sure the location has a position on the map

  1. Go to Location Settings > Location.
  2. Check the Address. The Map moves to match it.
  3. Drag the marker to the exact spot, for example your reception or main entrance.
  4. Select Save.

Step 2: turn geofencing on

  1. Go back to Visitors > Settings > Check-in.
  2. Turn on Enable Geofencing For Touchless Check-in.
  3. Set Geofence Radius (Meters). It starts at 50. Enter a whole number of 1 or more.
  4. Select Save.

If the switch is greyed out, the page shows “Add coordinates in Location Settings before requiring location for touchless check-in.” Complete step 1 first.

What visitors see

Just before their check-in is completed, the visitor sees Allow geolocation access and selects Share location. Their browser then asks for permission to use their location. Vizmo uses the location only to check the distance and does not store it.

Allow geolocation access prompt with the Share location button

Message What it means
You are outside the allowed geofence area The visitor is further away than the radius. They should move closer and select Try again.
Location permission is needed They declined or blocked location access. They need to allow it in their browser settings, then try again.
Location is unavailable Their phone could not work out where it is. They should check that location services are on.
Location request timed out Finding their location took too long. They should move to where the signal is better and try again.

A visitor can select Cancel check-in to stop. Geofencing applies to visitors checking in on their phones, including invited visitors who check in from their invite.

Note: phone location is less accurate indoors. If genuine visitors are being turned away, check that the marker is on your building and increase the radius.

Allow email check-in

By default visitors identify themselves with a phone number. With Allow Email Check-in on, they can use an email address when a phone number is not available.

  1. Go to Visitors > Settings > Check-in.
  2. Turn on Allow Email Check-in.
  3. Select Save.

Visitors then see Please enter your phone number or email address with two choices: Use phone number (fastest if you want SMS or WhatsApp verification) and Use email address (best when a phone number is not available). If you ask visitors to verify themselves with a one-time code, the code is sent to the option they choose.

Choice between Use phone number and Use email address

A visitor type can turn email check-in off for itself. If a visitor enters an email address and then picks a visitor type that needs a phone number, they see Phone required and are asked to enter a phone number to continue.

Welcome returning visitors

With Allow Returning Visitors on, a visitor who has checked in at the location before sees Welcome Back!. Their earlier details are filled in, so they only need to check them and carry on. The host from the last visit is filled in too, if that person is still at the location.

  1. Go to Visitors > Settings > Check-in.
  2. Turn on Allow Returning Visitors.
  3. Select Save.

Welcome Back screen for a returning visitor

You can still ask returning visitors to repeat some steps. In the visitor type settings, turn on Returning Visitor ID Card, Returning Visitor Photo, Returning Visitor Agreement or Returning Visitor OTP Verification for the steps you want repeated on every visit.

A visitor who is already checked in today and scans the QR code again goes straight to their digital badge.

Allow only invited visitors

Turn on Allow Only Invited Visitors if nobody should check in without an invite.

  • On the Vizmo Kiosk, the Check In button is hidden and visitors only see Have an Invite?.
  • On a visitor's phone, someone without an invite fills in the check-in form and then sees Check-in is invite only. They are not checked in.

Send the visitor an invite first. See Send an invite. This switch applies to the whole location and cannot be changed for a single visitor type.

Change an option for one visitor type

Email check-in and returning visitors can be set differently for a visitor type, for example if one type must always use a phone number.

  1. Go to Visitors > Settings > Visitor Types and open the visitor type.
  2. Open the Override Settings tab.
  3. In Check-in Settings, select Click to override on the option you want to change, then turn it on or off.
  4. Select Save.

Visitor type Override Settings tab, Check-in Settings section

An override only applies to that visitor type. A visitor type cannot turn on email check-in if it is off for the location.

Troubleshooting

  • The geofencing switch is greyed out. The location has no position on the map yet. Follow step 1 under Add geofencing.
  • Visitors at the site are told they are outside the area. Check the marker on Location Settings > Location and increase Geofence Radius (Meters).
  • A visitor has blocked location access. They need to allow location for the page in their browser settings and select Try again.
  • Visitors cannot choose an email address. Check that Allow Email Check-in is on, that it is available for your location, and that the visitor type has not turned it off.
  • Returning visitors are asked for everything again. Check that Allow Returning Visitors is on for the location and for the visitor type, and that the visitor type is not set to repeat the ID card, photo or agreement.
  • Visitors see “Check-in is invite only”. Allow Only Invited Visitors is on. Send them an invite or turn the switch off.
  • Visitors cannot check in on their phones at all. Check that Enable Or Disable Touchless Check-in And Check-out is on.